Article No.: EDA-PH01

Article Name: British type drapery pin on hooks

Wire thickness: ranged from 1.3 to 1.7mm, we now have 1.3, 1.7mm to be available.

Available colors: Nickle, Zinc., Chrome..

Materials: Low carbon steel, Stainless steel.

How to identify good quality drapery pins

**sharpness--This hook could be easily hanging the curtain to the curtain runners or rings, good quality drapery pin hook should be very sharp which can puncture through heavy-duty curtain fabrics easily.

**Flat--Flat pins can make the curtain hang upright without sloping.

**Precision--In the case that the pins are widely used in a drapery workshop which require a high working efficience, the best tool is to use a pinner dispenser which can hang the pins very fast at a measurable position. however, pinner dispenser have a very strict requirement on the pins quality especially for the precision, the pins used in the pinner must be consistant on the precision with no more than +/-0.15mm tolerance or the pinner will get locked and decrease the working effecience.

Eda Home Supplies CO.,LTD.started to produce pin hooks on 2005, after a few years development the company has launched a new line for high precision pin hooks production since 2008 with the daily output over 100K PCS per day, . basically can meet any requirements on high demands for this product around the world.

Article No.: EDA-PH02

Article Name: US Type drapery pins

Thickness: 1.5mm (0.060"), 1.7mm (0.068")

Finish: Galv., Waxed.